Shop & equipment
Probably Stolen battery charging: Recharger, PowerBloc and extra machine runs
A Recharger charges batteries stored inside it; a PowerBloc charges touching batteries and batteries inside touching machines, excluding a Recharger. The community baseline is 3 charge per night inside the Recharger and 2 through the PowerBloc, doubled by the relevant Wild upgrade. Both need the paid overnight power service. An extra Turbo run still consumes the target machine’s normal charge and inputs.
Stored charge and overnight electricity are different
A battery can run a machine without being ready to recharge. The community guide makes paid power a prerequisite for both charging devices. Check the end-of-day service and payment before rearranging the battery layout.
UPDATE 049 changes this after Power Hijack: the service is always active and disappears from the end-of-day list. It also fixes the old PowerBloc first-night bug after power activation or Powerline Hijack. Do not treat that fixed bug as the default explanation for every current failed charge.
Inside and touching are not interchangeable
| Device | What receives charge | Community baseline per night | With the relevant Wild upgrade |
|---|---|---|---|
| Recharger | Batteries held in its internal inventory. | 3 each. | 6 each. |
| PowerBloc | Batteries touching it; batteries in touching machines. Recharger is excluded. | 2 each. | 4 each. |
Choose according to the stock you actually need ready. A Recharger is a way to fill spare batteries in its own storage. A PowerBloc is an adjacency arrangement around machines or batteries. A battery merely visible in a nearby open window is not proof that its item occupies an eligible touching position.
Do not budget the upgraded rate unless the matching upgrade is owned. These are source-recorded rates; read the current device’s result when planning around modules, different batteries or later updates.
Make a small arrangement and compare the next morning
- Recharger route
Put batteries INSIDE the device. Fund the night power service.
- PowerBloc route
Place batteries or machines TOUCHING. Not the Recharger exception.
- Before night: note charge
Check each intended battery. Leave room for its normal use.
- Morning: compare readings
Did each intended cell gain charge?. Fix payment or placement first.
Check case: you want one farm battery topped up overnight. Use a valid PowerBloc placement for that machine, or move the battery to the Recharger when it can be spared. Read the actual charge before and after the cycle. Do not assume one charge count covers a second night merely because the farm ran once.
If nothing changes, check the power service and item placement first. If only one battery misses the gain, inspect its own position and the machine exception. Do not buy another charger before confirming which condition failed.
An extra run has two separate costs
The Advanced Turbo Charger is a reusable extra-operation tool in the community machinery record. Its own meter is 15; it consumes 5 charge per day to add 5 to that meter. From empty, that means three charged nights before a full meter.
- Charge the Turbo meter
5 charge adds 5 meter overnight. Empty to 15 takes three nights.
- Use the full tool on a machine
Meter returns to zero. One extra operation is requested.
- Target still needs its inputs
Normal machine energy and material. Output follows that operation.
Before using it on a Water Purifier, farm or another machine, check that target’s normal input, output capacity and charge requirement. Running a second cycle can be useful for a real deadline; it cannot repair a missing vessel or a quality floor.
The same source reports no separate cap on how often a machine can be turbo-run, but every run still needs the applicable resources. Do not turn that into an unlimited-output claim.
Count the entire next operation
The next night can include machine consumption, batteries that need replenishing and a Turbo meter being filled. Compare the current readings with those jobs before committing to another printer bottle or farm expansion.
If finished stock is not selling, extra charging capacity is not the first bottleneck to fix. Match output to buyers and retain only the spare energy that keeps an established cycle working.
Source: Machinery and You, Recharger, PowerBloc and Turbo sections. Community mechanics describe the current demo; read the actual item and customer information before spending.